Up to 1,600 SDFM speed capability
The tools used in the speed range of the whisker ceramics are longer
Better wear resistance and wear resistance than ceramic
Surface finish and whisker ceramics
10-15 times speed and carbide
Better wear resistance and resistance than CDBNs
Surface treatment of hard alloy surface
Strong brazing technology
More rigid cutting tool life and superior surface decoration than whisker ceramics
In the recommended application, it is harder than the ceramic tile
Higher speed, higher productivity
Compared with whisker ceramics, the superior physical properties of HG1 allow you to increase the speed; It could be as high as twice as fast as ceramics; Increased productivity and the potential to offset the need for additional equipment to meet the growing demand.
At higher cutting speeds, chips can easily break through, and are usually continuous chips of HRSDA materials. The result is the more efficient removal of the chip.
The tool lives longer
HG1 of high hardness, good thermal conductivity, and compared with ceramic whisker strength increase, in applied to the typical ceramic whisker speed, feed and cutting depth, can significantly prolong tool life.
Suitable for a wide range of high-temperature alloys
BIDEMICS has been successful
Calloy nickel alloy 718
Calloy aluminum nickel alloy 625
Speed up slot operation
VGDW style open slot insertion is now available
The excellent wear resistance and durability of HG2 lead to better performance than CDBN or tungsten carbide.
Compared with whisker ceramics, the tool life is greatly extended
The cutting speed of the ceramic is twice as fast
Surface finish is more than whisker ceramics
Suitable for powder metallurgy alloy
Tips for HG1
HG1 is excellent in Inconel 718 and Inconel 625.
JX1 can withstand small interrupts and smooth scale.
Slower feed prices in the corner bring stability.